Kids Table and Chairs

Table + Chairs for our kids.

This is the first piece of furniture I built with “real” wood using actual woodworking techniques such as panel glue-ups, attention to wood movement, and lots of mortises and tenons.  You will not find any metal in the joinery of the table or chairs.

Lumber used:

  • Table top & legs: Hickory/Pecan
  • Table apron: Oak
  • Chairs: Oak

The Hickory was from my father-in-law’s shop, leftover from cabinets he built.  The oak was from an Amish lumber mill.  I had been air drying the oak for several months before using it for this project.  The moisture content read close enough, so I gave it a go.

For the finish, I used a base coat of orange Homestead Dry Dye (TransFast) to give it an underglow of sorts.  Then, layers of dewaxed shellac, gel stains, and General Finishes Arm-R-Seal.   For the chair frames, I used aerosol spray Lacquer.

Kids Table-06 (Medium) Kids Table-13 (Medium) Kids Table-11 (Medium) Kids Table-12 (Medium)


Kids Table-29 (Medium) Kids Table-09 (Medium) Kids Table-14 (Medium) Kids Table-32 (Medium) Kids Table-33 (Medium) Kids Table-08 (Medium) Kids Table-23 (Medium) Kids Table-22 (Medium) Kids Table-19 (Medium) Kids Table-20 (Medium) Kids Table-39 (Medium) Kids Table-36 (Medium) Kids Table-27 (Medium) Kids Table-10 (Medium) Kids Table-01 (Medium) Kids Table-04 (Medium) Kids Table-02 (Medium) Kids Table-03 (Medium) Kids Table-05 (Medium)